ERW Pipe

Product Description

ERW Pipe We are engaged in offering a wide range of ERW Pipes, which is available in different sizes, shapes, and other technical specifications to meet the requirements of our clients. These pipes and tubes are offered in 4 inch size (10.2 mm) with OD and below, wherein the strip is fed into a set of forming rolls. The roll comprises horizontal and vertical rollers so placed as to gradually from the flat strip into a tube. 
This further allows to pass the welding electrodes. The copper disks type electrodes are connected to the secondary of a revolving transformer assembly. This helps to make contact on each side of the seam and temperature is raised to the welding point. Further, the outside flash is removed as the tube leaves the electrodes and the inside flash is wiped out by an air hammer or by passing a mandrel through the welded tube, after the tube has been cooled. This formation is known as Electric Resistance Welded or ERW Tube/Pipe.

SALIENT FEATURES

• High strength
  
• Corrosion resistance
  
• Durable
  
• Dimensional accuracy
  
• Fine finish
  

APPLICATION AREA

• Water pipelines
  
• Agriculture & irrigation (Water mains, sewerage systems, industrial water lines, plant piping, deep tube-wells & casing pipes)
  
• Gas pipe lines (Pipe lines for natural gas)
  
• LPG and other non-toxic gas
  
• The SW is meant for shallow water applications in a canal, natural stream, culvert, or pipe